- Boiling Tea: When Simmering Beats Steeping
- What boiling does that steeping does not
- Which teas survive it
- Boil or steep, by tea
- The parameters that matter
- Starting parameters
- Two ways to start, and when each is right
- How many times you can reboil
- How to do it
- What goes wrong
- The pot matters less than the heat
- Can you boil green tea?
- How much tea per litre when boiling?
- How long should I boil pu-erh?
- Should the water be at a rolling boil?
- Can I reboil the same leaf?
Boiling Tea: When Simmering Beats Steeping
What boiling does that steeping does not
Steeping extracts what hot water can pull from leaf in a few minutes. Boiling keeps extracting. The compounds that stay locked in a tight leaf at 95 °C come out at a rolling simmer, and the ones that taste harsh in a short steep soften when they are held at heat for ten or twenty minutes.
That is the whole trade. Boiling gets more out of the leaf and gives the harsh compounds time to break down, at the cost of losing the aromatics that make a fresh tea interesting. Which side of that trade you want depends entirely on what is in the pot. The method is old. Tang dynasty accounts describe water and leaf boiled together as the ordinary way of making tea, and boiled tea survives in Tibet, in Egypt and in parts of Southeast Asia. It is not a modern shortcut for people who cannot be bothered to steep.
Which teas survive it
Boiling suits tea that is dense, aged or stemmy. Compressed dark tea is the clearest case: a tight cake of ripe pu-erh releases almost nothing in a thirty-second rinse and keeps giving for twenty minutes at a simmer. Aged white tea behaves the same way, because the leaf has oxidised and its cell walls have toughened with time.
Stems and coarse leaf are the second category. Shoumei, gongmei and the stem-heavy grades that make a thin cup when steeped will make a sweet one when boiled, because the sugar-rich stem material needs sustained heat to give up what it holds. Green tea and light oolong are the opposite case. Boiling drives off the aromatics that define them within two minutes and extracts a bitterness that no amount of time removes. A boiled Longjing is not a stronger Longjing; it is a different and worse drink.
Boil or steep, by tea
| Tea | Method | Why |
|---|---|---|
| Ripe pu-erh, compressed | Boil | Dense leaf releases slowly |
| Aged white (5+ years) | Boil | Toughened leaf, oxidised |
| Shoumei, gongmei, stems | Boil | Sugar in stem needs sustained heat |
| Raw pu-erh, young | Steep | Boiling flattens the aroma |
| Roasted oolong | Either | Boiling softens the roast |
| Green tea, light oolong | Never | Aromatics gone in two minutes |
The parameters that matter
Three numbers decide the result: leaf to water, temperature, and time. Boiling uses far more water per gram than steeping does, because the leaf is going to give everything it has over a long period and there is no second chance to correct the strength.
A workable starting point is 5 to 8 g of leaf per litre of water. That is roughly a third of the ratio used in a gaiwan, and the reason is time: twenty minutes of contact does the work that three minutes at high concentration cannot. A first attempt at 10 g per litre usually comes out too strong, which is easy to fix by adding water and impossible to fix by taking it away.
Temperature is a simmer rather than a rolling boil. A gentle simmer at 90 to 95 °C extracts steadily without agitating the leaf into fragments; a hard boil breaks coarse leaf apart and puts grit in the cup. Time runs from ten minutes for a young raw pu-erh to thirty for a compressed ripe cake, and the useful test is colour rather than the clock.
Starting parameters
- Leaf: 3 to 5 g per 100 ml for dark tea and aged white, 5 to 7 g for ripe pu-erh.
- Water: 100 °C for dark tea and ripe pu-erh, 95 to 100 °C for aged white, 95 to 98 °C for aged raw pu-erh.
- Time: 3 to 5 minutes for dark tea and ripe pu-erh, 2 to 3 for aged white, extending by 1 to 2 minutes on each reboil.
- Vessel: a pot with a lid, glass or clay, not a thin steel saucepan.
Two ways to start, and when each is right
Chinese practice distinguishes cold-start from hot-start. In the cold-start method the leaf goes into cold water and comes up to temperature with it, which suits dense aged leaf that would otherwise stay tight through a short boil. In the hot-start method the water boils first and the leaf goes in for a short finish, which suits younger or lighter leaf that would turn bitter over a long heat.
The choice is decided by the tea rather than by preference. A compressed ripe cake wants cold-start, because the block needs time to open before it can give anything up. A loose aged white wants hot-start, because its leaf is already open and long boiling strips the sweetness that made it worth keeping.
Both methods share one rule: the water should be at a bare simmer, not a rolling boil. A hard boil agitates the leaf into fragments and puts grit in the cup, and it drives off the aromatics that survive a gentler heat.
How many times you can reboil
Two or three rounds is the normal range, with a good aged tea going to four or five. Each round needs longer than the last, because the leaf is giving up less each time: add one to two minutes per round and judge by colour rather than the clock.
The colour is the reliable signal. A cup that comes out pale after twenty minutes means the leaf is spent and further rounds will only produce brown water. A cup that is still dark and sweet at the third round means there is more to take.
One caution worth stating plainly: repeatedly boiling the same leaf to exhaustion is not free. The compounds that come out late are the ones that taste of wet wood and dust, and there is no benefit in extracting them. Stop when the cup stops being pleasant.
How to do it
Rinse the leaf first with a quick pour of hot water and discard it. Compressed tea in particular holds dust and the rinse removes it, and it also starts the leaf opening before the long cook begins. Put the rinsed leaf in the pot, add the water at a simmer, and lid it. Keep the heat low enough that the surface moves without bubbling hard. Check at ten minutes, and again every five after that. The cup should darken steadily and the smell should move from dusty to sweet.
Pour through a strainer, because boiled leaf breaks up and a fine mesh is the difference between a clear cup and a cloudy one. The leaf can go back in the pot with fresh water for a second round, which for a compressed cake is often better than the first. Let the cup cool to below about 60 °C before drinking, which is the usual advice for any hot drink and matters more with a liquid that holds heat as well as a boiled tea does. Do not hold the pot at heat after it is ready. A boiled tea left simmering keeps extracting and turns from sweet to stewed in about five minutes, and there is no way back from that.
What goes wrong
The commonest failure is too much leaf. Boiling concentrates everything, including the compounds that taste of wet wood, and a pot that looked under-filled with leaf produces a cup that is unpleasantly strong. Start weak; it is the one error that is easy to correct. The second is a hard boil. Coarse leaf disintegrates and the cup turns cloudy and gritty, and the flavour picks up a flat, cooked quality that no strainer removes. A simmer is not a compromise between steeping and boiling; it is the method.
The third is boiling a tea that should not be boiled. A green tea in a pot of simmering water loses its aroma in the first two minutes and yields a bitter, dull liquid that no one would choose. If the leaf is fresh and aromatic, steeping is the right answer and boiling is a mistake.
The pot matters less than the heat
Any pot with a lid will do, but a thin steel pan transfers heat too directly and makes a hard boil difficult to avoid. Glass lets you watch the colour, which is the most useful signal you have. Unglazed clay holds heat and softens the simmer, and it will take on the smell of whatever you boil in it, so keep one pot for dark tea and do not use it for anything else.
An electric kettle with a temperature setting is a poor substitute, because it heats and cuts out rather than holding a temperature. The method needs sustained gentle heat, which means a hob, a hotplate or a fire. How the same leaf behaves under ordinary steeping is set out in dark tea ratios and timing. The storage question that decides whether a cake is worth boiling at all is covered in which dark teas improve with age.
Can you boil green tea?
You can, but you should not. The aromatics are gone within two minutes and the cup turns bitter.
How much tea per litre when boiling?
5 to 8 g per litre, roughly a third of a gaiwan ratio, because the contact time is much longer.
How long should I boil pu-erh?
10 minutes for loose leaf, 20 to 30 for a compressed cake, judged by colour rather than the clock.
Should the water be at a rolling boil?
No. A gentle simmer at 90 to 95 °C extracts steadily without breaking the leaf apart.
Can I reboil the same leaf?
Yes. For a compressed cake the second round is often better than the first.
